Different
installation of the system involves the use of a variety of components. To
choose the right hardware set for sliding gates, you need to pay attention to:
Passage
width;
The weight
of the entire system;
Wind load;
Manufacturer.
The door
opening width is generally standard. A 4-meter system is installed for a house
or summer cottage, but there are also installations with a width of 6 and 8
meters. When buying accessories, this point is taken into account first. The
wider the width, the stronger must be the components for the rolling structure,
the price can also vary. The same rule applies to the weight of the entire
installation. Incorrectly selected fittings simply cannot cope with the daily
load, and the entire system will have to be reinstalled, even the sash.
The
calculation of the wind load will allow the sash to withstand even strong gusts
of wind when opening when the sliding mechanism is most vulnerable. The
uprights of the opening must be reliable and stable, and the guide rollers must
be made of strong metal. The choice of the manufacturer is equally important.
Highlights of hardware
The
component parts of the mechanism are made from modern ultra-strong polymers
using innovative technologies. All elements of the sliding structure are made
in such a way as to ensure maximum reliability and durability, as well as
unsurpassed softness and quiet operation of the door.
Sliding
gate fittings consist of:
The plug
covers the ends of the console, preventing clogging by snow and dirt. It also
reduces the force of impact when closing.
The toothed
rack is attached to the door leaf and serves to transmit the drive movement. It
is made of heavy-duty polymer, additionally reinforced with fiberglass.
The end
roller is attached to the console to ensure smooth closing of the gate. The
design does not require lubrication, does not clog and prevents clogging.
The console
(bearing curved profile) is one of the key elements of the overall door
structure. Available in two sizes – for small and large sets of consoles.
The lateral
rolling limiter for the large cantilever set uses a bent profile. This allows
it to be used on gates up to 800 kg and up to 10 meters wide.
The side
rolling limiter for the small console assembly uses a bent profile. This allows
the product to be used on gates weighing up to four hundred kg and up to four
meters wide.
The
adjusting foot is used to facilitate installation and adjustment of the gate
during operation.
Carrying
roller carriage (polymer rollers) in the fittings are made of high-strength
material – fiberglass-reinforced polymer.
Carrying
roller carriage (steel rollers) are manufactured using high-precision
equipment. The surface is covered with galvanized material that protects it
from external influences.
The catcher
is designed in such a way that it reliably fixes the gate in its final position
when closing. The design is resistant to significant wind loads.
Automation
for sliding installation works with sashes weighing 300-3500 kg - this is a
mechanism that ensures the mobility and stability of the entire structure. The
sliding gate fittings must not set the system in motion - for this, the door is
equipped with an automatic system. Installing a quality kit ensures smooth and
quiet opening and closing. Therefore, it is important to select the fittings
that are best suited for the operation of the system.
You can
order and buy a kit on the website, contact the manager by phone or come to the
representative office in the regions.
